XDM 120 Smart Efficient Small Powder Bed Laser Melting Printer
Product Detail
XDM 120 is the smallest of XDM range of 3D metal printers. The printer was developed with multiple innovations including a dual cartridge powder supply system, a bidirectional recoating system, and an integrated building chamber. Being extremely easy to load and clean powder, high accuracy, high efficiency, low running cost, the printer is very suitable for university and research Institute, as well as for electronics, precision machines, and high-end dental applications. 
Product Features
- Modular removable powder cartridges, very easy to load and unload powder.
- Bidirectional coating enables high operational efficiency, essential for this printer
- The building chamber is integrated within the frame, which ensures high accuracy and allows for high-pressure, leak-free operation.
- High scan resolution, giving fine-forming features.
- Smart control software, with process parameters fully open and editable.
- Customizable scan path, enabling the forming process to be easy to modify and optimize.
- Patented filter system, lowering maintenance frequency.
- Full-format baseplate, 100% utilization of building envelope.
- Low gas consumption, giving low running cost.
Product Specifications
|
Product Name |
XDM 120 Powder Bed Laser Melting 3D Metal Printer |
|
SKU # |
EPXDM120 |
|
Model # |
XDM 120 |
|
Building Volume (W x D x H) |
120mm x 120mm x 100mm (4 inch x 4 inch x 3 inch) |
|
Laser System |
Yb Fibre Laser (IPG), 500W |
|
Min. Focus Diameter |
Approx. 55μm |
|
Optic System |
F-theta lens, high-speed and high-precision scanners |
|
Dispensor and Recoater |
Upper dispenser, two-way recoater |
|
Layer Thickness |
20μm - 100μm |
|
Power Supply |
AC 220V/50Hz, 3.42kVA |
|
Unit Dimensions W x D x H |
850mm x 1115mm x 2135mm (34 inch x 44 inch x 85 inch) |
|
Weight |
approx. 800kg (approx. 1764lbs) |
|
Software |
XDM IntelliSlice, XDM IntelliProc®, XDM IntelliMake®, XDM STATE |
Sample of 3D-Printed Induction Coil
Sample of 3D-Printed Medical Implant
Disclaimer: ACS Material LLC is the sole distributor of XDM 3D Printing Technology in the United States. ACS Material LLC believes that the information on our website is accurate and represents the best and most current information available to us. ACS Material makes no representations or warranties either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information listed here. Accordingly, ACS Material will not be responsible for damages resulting from use of or reliance upon this information.